wedge stamping

Follow Thread

By john b

  • 0 Likes
  • 21 Replies
  1. Shef215

    Shef215
    LeRoy, NY

    I do all my own paintfill that part is super easy, however I'm deathly afraid of stamping my wedges lol I really don't want to mess them up. Testors Enamel model paint is the best I've found. It's always carried in stock at Michael's craft stores and it holds up so freaking well. Here's a few pictures of mine I did. 

    That was my SM4s

    Here are my SM5s

  2. john b

    john b
    dalton, GA

    how do you clean off the extra paint ?

  3. Matt P

    Matt P
    Dublin, OH

    Nail polish remover seems to work for me.

  4. john b

    john b
    dalton, GA

    what do you use to clean the extra paint off and what do you use to put the paint on ?

  5. Jake R

    Jake R
    East Aurora, NY

    I use acitone on a paper towel and rub gently on the excess paint. it comes off perfect and leaves the paintfill intact. after I remove the excess paint I clear it with nail polish clear.

  6. Chris Hatem

    Chris Hatem
    Boston

    Acetone to remove excess paint works great.  And stamping is easy but it takes practice to develop confidence.

  7. Shef215

    Shef215
    LeRoy, NY

    john b said:

    what do you use to clean the extra paint off and what do you use to put the paint on ?

    I found two successful ways to do it. 

    First is you can use a tooth pick and just dip the end of the tooth pick in the paint and kind of "dab" it into the areas you want to paint fill. This way is the way to go if you don't want to have to worry about excess paint.

    The second which is the way I do it, is to just use a brush and completely cover the area you want to paint fill. Let the paint dry for a bit and then like others have said dab a little acetone although I use mineral spirits onto a paper towel and wipe clean. The excess comes over very easily but the it stays into the areas you wanted to paint fill. One thing I've noticed to make it easier is to fold the paper towel a few times to make it like a tight straight edge almost and just wipe across the surface of the wedge. This method has worked the best for me. I hope this helps! 

  8. Chris B

    Chris B
    Monroe, LA

    Those wedges are well done - good job 

  9. Shef215

    Shef215
    LeRoy, NY

    Chris B said:

    Those wedges are well done - good job 

    Thanks Chris!

  10. Brian V

    Brian V
    Long Beach, CA

    Those look legit! Great work! 

  11. Shef215

    Shef215
    LeRoy, NY

    Brian V said:

    Those look legit! Great work! 

    Thanks Brian!!

  12. Ryan G

    Ryan G
    Calgary, AB

    It's easy, just make sure you use a big enough hammer and don't be afraid to hit hard.  Also try to make sure that you can do it in one blow for good results.  If you can grab some scrap steel to practice on first.  I find Sharpie Oil based paint pens work well (cheap also) and will last a season before you need to touch up, if not enamel model paint and a syringe works also.

  13. Chris P

    Chris P
    Katy, TX

    SHEF215...Well done. That's some of the best I've seen in a long time...can I send you mine? j/k.
  14. Shef215

    Shef215
    LeRoy, NY

    Chris P said:

    SHEF215...Well done. That's some of the best I've seen in a long time...can I send you mine? j/k.

    Haha thanks Chris! If you were local I'd love to do em for ya!

  15. john b

    john b
    dalton, GA

    What would you use to stamp ?

  16. Mike C

    Mike C
    Dallas, TX

    Great looking wedges!  It looks like you really have the paint fill down well.  I have done the stamping on a couple of clubs after watching them do it for me in the Titleist Tour van a few years ago.  You need the right set of stamps and find some old wedges with worn grooves to practice on so you don;t ruin any of your good wedges.  If not, you can always send them to Wedgeworks to be stamped.

  17. Shef215

    Shef215
    LeRoy, NY

    Mike C said:

    Great looking wedges!  It looks like you really have the paint fill down well.  I have done the stamping on a couple of clubs after watching them do it for me in the Titleist Tour van a few years ago.  You need the right set of stamps and find some old wedges with worn grooves to practice on so you don;t ruin any of your good wedges.  If not, you can always send them to Wedgeworks to be stamped.

    Thanks Mike! It took a few tries to find a method I was comfortable and confident with, but once you do it a few times it's easy peasy! 

    One thing I wanted to add to the OP that I forgot is I don't know how anyone else does, but I don't remove the stock paint. I just paint fill right over it and I've never had an issue doing it that way.

  18. Chris Hatem

    Chris Hatem
    Boston

    I use Young Brothers stamps.
  19. tdogg21

    tdogg21
    Chambersburg, PA

    I like those green accented wedges!  I might have to do that this winter.  I've been wanting to stamp and paint fill my wedges for a year or so, but I just haven't found the nerve to do it.  I'm afraid I'll screw up my wedge.  I'm debating whether I should upgrade my wedges this winter.  If I do, I'll just practice on the older ones.

  20. Chris Hatem

    Chris Hatem
    Boston

  21. Wade W

    Wade W
    Roanoke, VA

    Lots of threads on other boards about this (and a few YouTube videos will help as well).

    I send all of mine to a fellow Titleist ambassador who stamps and paints in his home workshop.  Does stellar work, too.

    WW

Please login to post a comment.

Sign In

Haven't registered for Team Titleist yet?

Sign Up